Flat Drop Fiber optic cable for installation and suspension on user streets, including 8 fibers. Non metallic All Dielectric Ftth Flat Fiber Drop Optical Cable with FRP Strength Member.Center loose sleeve, fiber paste filled in the sleeve, two non-metallic strength components, sleeve, One tearing lines, and black polyethylene outer sheath.
The Flat Drop Cable from Toner is an industry standard Loose Tube fiber drop cable for FTTH applications. This flat drop cable is available with 1, 2, 6 or 12 count fiber with a toneable copper component embedded in the polyethylene jacket.
The flat drop cable features G.657.A2 or G652D fiber which is bend–insensitive single-mode fiber with a minimum design bend radius of 0.30 inch (7.5mm)
Share:
Flat drop fiber optic cable allows versatility for network edge installations. The dual radial strength members allow for aerial self-support lengths of up to 290 feet in light loading conditions. Consult the manufacturer specifications for exact minimum rated cable loading conditions to suit your construction requirements. This cable also has the crush resistance properties to be direct buried. For such cases, flat drop cable may be available with a tone wire for ease of locating.
The flat drop fiber optic cable with singlemode fiber meets or exceeds ITU G.652.D or G657 standards.
Flat drop fiber optic cables are housed in loose tubes that are made of high-modulus plastic and filled with waterproof compounds with two FRPs are applied as strength member，loose tube is putted in the central of the cable and protected by two FRPs. And Polyethylene sheath are applied as outer sheath.
Life Time of Flat drop fiber optic cable：
Flat drop fiber optic cables supplied in compliance with this specifications is capable to withstand the typical service condition for a period of THIRTY (30) years without detriment to the operation characteristics of the cable.
Features
Flat drop fiber optic cable Features:
1.High fiber density, small size, light weight, beautiful appearance and compact structure.
2. It is easy to construct and connect, easy to branch and flame retardant.
3. All-medium structure design, no electromagnetic induction influence.
Technical Parameters
Technical Parameters of flat drop fiber optic cable:
• Tube: thermoplastic material containing optical fibers and filled with a suitable water tightness compound.
• Peripheral Strength Member: 2 FRP beside of tube.
• Outer Sheath: HDPE
In case of aerial installation between poles, the maximum permitted span is 50 meter with 1% installation sag.
The cables withstand the maximum additional loads generated by wind and ice in the following environment:
(a) temperature –5°C, wind speed 100 km/h
(b) temperature –20°C , wind speed 50 km/h , ice radial thickness 8 mm
The use of proper fittings is recommended, in order to achieve the mentioned performance.
| Parameter | Value |
| Cable Count | 8 |
| Type fiber | G.652 |
| Power components | FRP2*2.2mm |
| Loose Tube | 2.0mm |
| Cable Diameter (H*D), мм | 4.5*8.5mm |
| Max.short term tension, kN | 4 |
| Sheath | PE |
| Color | Black |
| МGross, kg/km | 55 |
| Drum cable length (km) | 4 |
| working temperature, °С | -60...+70 |
Cross Section of flat drop fiber optic cable：
Inquiry
You Might Also Like
